mBDA-RACK-E01 (Chassis)

– mBDA-PMU-A92W300 (Power Supply)

– mBDA-RF (RF Units) – See RF Card Solutions Below – supports up to 6 cards

– CM-ACJPY5-IA1 (Combiner) – Optional



• Supports up to 6 bands of 700 Upper C/700 Lower ABC/800/850/1900/EAWS

• Supports GSM, CDMA, WCDMA, and LTE modulation

• Supports multi operator configurations and up to 3 sub-bands per band

• Operation via friendly and easy OMT interface with RJ45 connection

• Integrated Ethernet for remote monitoring and control



Dimensions (in/mm)mm

System Rack (6 Bands)

Power Unit

RF Unit

267 x 482 x 485

20 x 80 x 440

220 x 60 x 350


System Rack (6 Bands)

Power Unit

Combiner Unit

RF Unit





 Power ConsumptionW

Power and Monitor Unit

RF Unit



 Power Supply 100-240VAC (47-63Hz)
 Power Up Waiting  Time (sec) approx. 180
 Operating  Temperature°C -20 to +40
 Operating Humidity 10 to 85%
 Ingress Protection IP30
 Enclosure Cooling Convection or Fan
 RF Connectors 4.3-10 (2600MHz - Mini-Din)

19" Rack

mBDA RF Modules

At the heart of the mBDA system is controlling and distributing the RF signals. The mBDA can take up to 6 RF modules to customize the wireless ecosystem. Just simply plug the unit in and make the connections to the antennas.


• Avaiable in 6 bands: 700MHz Upper, 700MHz Lower, 800MHz, 850MHz, 1900MHz, and EAWS.

mBDA Combiner Module

This penta band combiner fits directly into a 19" rack simplifying the system installation. Simply connect the RF source from the donor antenna to the combiner and then to the RF modules to create a simple, clean cellular repeater system.



• Penta band combiner: 700/800/Extended PCS/AWS1&3 and WCS+2.6G.

This website uses cookies and similar technologies. By continuing to browse the site, you agreeing to our use of cookies. Read our Privacy Policy.