PART 1: PREPARATION – WHAT TO BRING TO THE JOB SITEThe very first step in commissioning a BDA is to...

PART 5: A DEEPER DIVE INTO DESIGN CONSIDERATIONSThis section is meant to detail design considerations for your public safety system....

Watch Matt Lunny's Video Tech Talk on Uplink Strength, Gain & Noise are affected by a buildings size and distance...

With Comba Telecom’s 5W CriticalPoint Public Safety BDA now available, we decided to take a look at the use cases...

When you plan your Public Safety design with a BDA or Fiber DAS, an RF environment study or RF Site...

As a Public Safety OEM, Comba is often asked: “What actions should be performed for an annual inspection, or PMI...

Comba Public Safety BDAs will require a Bias-T Kit for some applications. This tech brief will explain why the Bias-T...

Introduction:The purpose of this document is to highlight the proper installation and end-to-end testing of the fiber plant (aka, fiber...

Understanding Dry Contact Terminology and How It Applies with Respect to the Bi-Directional Amplifier (BDA), Battery Backup Unit (BBU) and...

“Radio Test 1, 2, 3…”This is a common phrase we hear as the AHJ walks through the building during acceptance...

Fiber, the core infrastructure of any long-distance communication for modern technology. As such, if there are any...

Introduction: Conducting the isolation test is one of the most important steps when commissioning a BDA or Fiber DAS solution. If...

The majority of public safety BDA’s provide signal readings/RF measurements in the graphical user interface (GUI), and some are also...

In the realm of radio communication, establishing reliable connections is crucial for seamless data transmission and effective communication. However, issues...