Categories Tech Briefs

How to Commission The Comba V3 Class A BDA with the Internal Software Tools!

Introduction:The Comba V3 Class A BDA provides new and enhanced commissioning tools within the user interface to assist individuals in...

Solving Indoor Cellular coverage issues

Market research shows nearly 80% of cellular data is consumed indoors. As US major operators continue to reduce investment for...

Can we use a signal booster to enhance fire ground simplex channels

CALCULATING LINK BUDGET: PUBLIC SAFETY UPLINK

In the realm of radio communication, establishing reliable connections is crucial for seamless data transmission and effective communication. However, issues...

Basic Commissioning of a Public Safety BDA with a Spectrum Analyzer

The majority of public safety BDA’s provide signal readings/RF measurements in the graphical user interface (GUI), and some are also...

HOW TO PERFORM A MANUAL ISOLATION TEST ON A FIBER DAS

Introduction: Conducting the isolation test is one of the most important steps when commissioning a BDA or Fiber DAS solution. If...

Fiber the Right Way

Fiber, the core infrastructure of any long-distance communication for modern technology. As such, if there are any...

DAS DESIGNING TO ELIMINATE THE NEAR-FAR EFFECT

“Radio Test 1, 2, 3…”This is a common phrase we hear as the AHJ walks through the building during acceptance...

UNDERSTANDING DRY CONTACT TERMINOLOGY AND HOW IT APPLIES WITH RESPECT TO THE BI-DIRECTIONAL AMPLIFIER (BDA), BATTERY BACKUP UNIT (BBU) AND FIRE ALARM CONTROL PANEL (FACP) EQUIPMENT

Understanding Dry Contact Terminology and How It Applies with Respect to the Bi-Directional Amplifier (BDA), Battery Backup Unit (BBU) and...

1 2 3 4

This website uses cookies and similar technologies. By continuing to browse the site, you agreeing to our use of cookies. Read our Privacy Policy.

Continue