BBU-NG-LFP060 (60AH)

BBU-NG-LFP100 (100AH)

 

 

AC-DC Battery Unit:
• Supports internal battery for power backup application
• Provides 4 External alarm ports to connect Dry Contact Port
• Provides 7 Dry connectors to the monitor centre
• Supports local monitoring and control by RJ45 port
• Supports multi alarm LEDs:
         o AC fail alarm
         o Battery alarm
         o Power controller failure alarm
         o 4 External alarms
BBU Inverter:
• Built-in UPS function
• True sine wave out
• High surge power up to 4400W
• Temperature controlled cooling fan
• AC output voltage and frequency selected by DIP S.W
• Power ON-OFF remote control
• Protections:
• Input: Reverse polarity/DC. Low alarm/DC low shutdown/Over voltage
          o Output: Short circuit/Overload/Over temp.
• Battery over discharge protection (low voltage disconnect)

 

Description

Mechanical

 AC-DC Battery Unit:

 Dimensions, H x W x D

in(mm)

29.4 x 23.8 x 12.0 (747 x 605 x 305)

Weight (without bracket)

lb(kg)

78.3(35.5) (not include the batteries)

Enclosure Cooling

 

Convection

Operating Humidity

 

£ 95%

Environmental Class

 

NEMA 4X

 BBU Inverter:

Dimensions, H x W x D

in(mm)

29.5 x 12.4 x 6.9 (750x 315 x 175)

Weight (without bracket)

lb(kg)

44.1(20)

Enclosure Cooling

 

Fan

Operating Humidity

 

£ 90%

Environmental Class

 

IP30

Note: Typical specifications at room temperature

 

Electrical

  AC-DC Battery Unit:

Power Supply (Input)

VAC

100-240/47-63Hz

Power Supply Connector (Input)

 

 Terminal Block

Power Supply (Output to Inverter)

VDC

-48V

Power Supply Connector (Output to Inverter)

 

Terminal Block

Maximum Input for Dry Contact Port

 

24VDC, 1A

Power Capacity per Battery Type

60AH

 

60AH

100AH

 

100AH

BBU Inverter:

 

 

Power Supply AC (Input)

VAC

110 (47-63Hz)

Power Supply AC Cable (Input)

12 AWG

3 conductor unterminated cable (4 m)

Power Supply DC (Input)

VDC

48~56

Power Supply DC Cable (Input)

10 AWG

2 conductor unterminated cable (2 m)

Power Supply AC (Output) to Battery Unit

VAC

110 (47-63Hz)

Power Supply AC Cable (Output) to Battery Unit

12 AWG

3 conductor unterminated cable (2 m)

Power Supply AC (Output) for MU or HUB, 2 ports

VAC

110

Power Supply AC Connector (Output) for MU or HUB, 2 ports

 

NEMA 5-15

Rated Power (Continuous)

W

750

Note: Typical specifications at room temperature

 

Outline Drawing:

 

 
 

 

 
 

Datasheet: ComFlex NG Backup Battery Unit Datasheet

 

This website uses cookies and similar technologies. By continuing to browse the site, you agreeing to our use of cookies. Read our Privacy Policy.

Continue